Displays
Fly & Flot counter display
Cardboard counter display for TColors' Fly & Flot volumetric markers, built to grow: the side panels hide spare slots that open up as the range adds colours, without taking more counter space.
- Client
- TColors (TEB)
- Services
- Structural design, prototyping, printing and production
- Year
- 2026
Fly & Flot — a counter display that grows with the range
Fly & Flot is the volume paint from TColors: volumetric markers that are applied cold, dry in the air and leave raised shapes that float on water. They are made at the paint factory of TEB, a non-profit that creates jobs for people with intellectual disabilities. For the shop floor they needed a cardboard counter display that could sell both the single marker, colour by colour, and the boxed set of six.
The challenge: a display that doesn't get outgrown
The brief came with an unusual condition. The colour range isn't closed: if the brand wants to offer more shades, the display has to take them without a redesign and without asking the shop for more room.
The answer is hidden in plain sight. The body of the display is a full grid of slots, but at launch only the central part is on show; on each side a communication panel covers the spare slots. When a new colour needs space, the side panel opens as a window, from the bottom up, and reveals one more slot. The internal structure is there from day one: all that changes is how much panel gets printed. Same counter footprint, up to twice the colours.


Three zones, three jobs
Shaped header. The logo at full size and the brand characters breaking the outline, so the piece is recognised from the door.
Marker grid. Each slot holds a dozen markers lying flat, cap facing out. The product does the signposting itself: shoppers see the colour instead of reading a label, and take a marker from the front without disturbing the rest.
Boxed-set tray. The base splits into two large bays for the set of six, with a low front lip that holds it without hiding it and carries the brand message.


From white prototype to printed piece
An extendable display can't be signed off on screen. We worked it out on white prototypes with the real marker inside: how many fit per slot, how far they need to stick out to be picked up easily, how far the side window can open before the panel loses stiffness. We tried the piece with one window per side, with two, and with the side full of product.


With the structure settled came the print proof. Fly & Flot's artwork sits on a black background, which makes the colours jump but forgives nothing: any white edge shows. So the inside is black too, letting the grid disappear and leaving only the colour of the product.

Messaging that doesn't take space from the product
The two side panels work as a page: on the left, what the product is, a QR code and the social-value seal; on the right, what it's for. Those are exactly the surfaces that get cut back if the range grows, so the message is ordered top to bottom: the essentials stay at the top, the last part to open.
Further down you can try it yourself: the 3D model lets you open the sides and see the display with more colours. The format is covered in our counter displays page.
Drag to rotate the display
Interactive 3D model
Play with the compartments
This is the display as it was built. Raise the number of colours and watch the side panels open up to add slots without taking any more counter space.
Central grid full · sides closed
The first eight are the real range; the rest are simulated colours to show the extension.
- Slots in use
- 8
- Markers on show
- 96
- Counter footprint
- Unchanged